LOL, that was pretty much my experience as well. I just burned through a pound of high quality beans in 24 hours, but I am starting to see a light at the end of the tunnel. Maybe the next bag will last a bit longer. :)
mr_pedro Senior Member Joined: 13 Feb 2012 Posts: 58 Location: Baltimore Expertise: I love coffee
Posted Fri Jun 15, 2012, 7:19pm Subject: Re: idiots guide to pulling consistent shots?
Looks like you are well on your way. Another thing you can do, rather than looking at the volume of the shot, is to weigh it. For a 15g dose I like my shots in the 15g~20g range, but you can also go towards the 30g for a regular espresso. All of these shots should be in about 25s~30s, the only difference is the grind. So with each coffee you should experiment a little to what you like best.
I don't know what you mean with not having a clue how to adjust the grinder, it is all done with trial and error at the begining. So if one shot is going too fast, you grind the next a bit finer. But as you see, this method only works if you can keep all else constant, that is why weiging the dose is important.
greattemper Senior Member Joined: 25 Mar 2012 Posts: 19 Location: Tel-Aviv Expertise: I love coffee
Espresso: Andreja Premium by quickmill Grinder: Lelit Roaster: Popcorn
Posted Fri Jun 15, 2012, 10:30pm Subject: Re: idiots guide to pulling consistent shots?
I am pleased to report that not only is it repeatable, but its delicious! The single biggest adjustment I made since starting this thread is to dose by weight. In theory I should be able to control the dose with the grinder timer, but now that I am starting to "taste" success, I'm not going to mess with it.
calblacksmith Moderator Joined: 25 Nov 2007 Posts: 8,259 Location: Riverside, Ca, U.S.A. Expertise: I live coffee
Espresso: ECM Vene. A1, La Cimbali M32 Grinder: Azkoyen Capriccio, Major Vac Pot: 40s era Silex Drip: Msl. Com. brewers Roaster: gave it a try, decided no
Posted Mon Jun 18, 2012, 5:58am Subject: Re: idiots guide to pulling consistent shots?
It is stepless but there are notches for reference - see image below. At first I was adjusting by 5-6 notches and the result was much more dramatic than I expected. In fact I have dumped every single shot I've ever tried when *not* using the factory setting, so I am disinclined to mess with it anymore until I know what I am doing and/or have a compelling reason.
I started weighing my beans this morning in an effort to regulate the dose and thus far the two shots I pulled with factory grinder settings have been decent - certainly good enough for a latte. For distribution I tried stirring with a paper clip - not quite WDT since I don't have a funnel but a step in that direction. I assume my unlevel tamping is also a contributing factor.
I only had to dump 60% of my shots this morning. Definitely better than yesterday. Maybe I should temporarily switch to decaf so I can get more practice! :D Just kidding. I think.
When adjusting a Mazzer, SMALL movements make a big difference. Try moving the ring in the smallest possible movements. A move that is almost nothing will make a difference of a few seconds in a shot. The adjustment lever screwed into the ring really helps with small movements. Do not move more than about half of a "bump" on the adjustment ring at a time and when you are close, move it the smallest amount you possibly can to bring it in.
In real life, my name is Wayne P. Anything I post is personal opinion and is only worth as much as anyone else's personal opinion. YMMV!
Feed the newbs, starve the trolls and above all enjoy what you drink!
Yup. I had to make adjustments this morning when I switched to a different type of bean and ended up dumping 2 shots. One bump made the difference between 10ml in 30 seconds and 55ml in 26 seconds. I do wish it wasn't so sensitive but its just a matter of getting used to it.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.