Evanini Senior Member Joined: 1 Oct 2013 Posts: 2 Location: California Expertise: Just starting
Posted Tue Oct 1, 2013, 2:30pm Subject: Brasilia Club boiler leaking
I just bought a Brasilia Club (my first machine) and it appears that the boiler is leaking. In addition no water comes out of the steam wand. Does anyone know of a good tutorial for fixing this? Other suggestions?
SStones Senior Member Joined: 24 Nov 2012 Posts: 474 Location: Canada Expertise: Professional
Espresso: Giga 5, ECM Giotto, Rocket... Grinder: Anfim Milano-Best Vac Pot: No :( Drip: Some $30 thing from Walmart Roaster: I buy pre-roasted.
Posted Tue Oct 1, 2013, 7:08pm Subject: Re: Brasilia Club boiler leaking
To fix it yourself, you'd need at least the one seal that isn't properly installed, potentially the whole set of seals that might be moved during the repair (If it's an element seal leaking, you'll have to open the boiler, etc.).
Return the machine and get your money back. Unless you got a great deal for it being a damaged machine and think you'll enjoy spending time fixing it rather than enjoying espresso.
If the boiler is leaking badly enough to be unable to build pressure, there's no pressure to move water out of your steam wand.
Posted Tue Jan 7, 2014, 8:32pm Subject: Re: Brasilia Club boiler leaking
The Brasilia Club is a good machine and the original price was higher than the Silvia. If you want to repair the machine yourself, the machine is simple and parts are usually inexpensive. Boiler leaks are often o-rings which often cost more to ship than their actual cost. My Club had a leak and it was the copper pipe from the pump to the boiler. I simply unscrewed the pipe and screwed on a generic hose with appropriate pressure and temperature and thread size.
The lack of water from the steam arm may be (1) pump is not primed or (2) solenoid is bad/blocked. Priming the pump is especially difficult on the Club because it has a one-way valve. What I do is
(1) machine is plugged in and the ON switch is off! The on switch turns on the heater which can ruin the heater if the boiler is empty. (2) open the steam valve (3) pull the plastic tube out the the water tank and hold it vertically. (4) pour water down the tube (I use a measuring cup with a fine spout). I tap the pipe to get the water to flow down to the pump. (5) briefly pulse the water button a few times (The pump is energized even though the power is off.) (6) if the water level of the water tube goes down, repeat steps 4-5 until water flows from the steam arm. If the water level never decreases, you have solenoid or a pump problem.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.