Posted Sun May 26, 2013, 3:59pm Subject: Re: Is CC1 the best 58mm machine under $1000?
I have to say that I think unsightly might be a little strong. I agree that is not the most aesthetically pleasing design, but I don't consider it unsightly. Handles... yeah, they too are not the product of a creative designer, but they are functional. I agree with the location of the steam knob... you definitely have to leave plenty of room on the right side of the machine. I have had a little trouble with water getting behind the drip tray, but not much. Not much of an issue with me. At first, I found the drain line to be annoying too, but have since learned all of the tricks of getting the water tank in and out with minimum effort. I guess at this point it bothers me more that I have to remove the PF to get the tank out than the drain line does.
The bottom line is that all I really want is a good espresso... I knew I wasn't buying a machine with great lines when I bought it But I think the Vario W fits in the same category... not beautiful, but it is functional. They look good together...both of them are black and stainless. May main gripes at this point is that my steam wand occasionally drips water (much less of a problem when I started leaving the machine on all of the time), and my brew pressure is a little low. I am not above trying to figure out how to adjust the pressure regulator after it goes out of warranty. I don't know why I am worrying about warranty... at this point I have two issues that would qualify for warranty repair, but I am not interested in sending it in and messing with it at this point. I guess I am assuming it will keep working a while and I know it the back of my mind I want a "pretty" machine some day... who knows if I ever will get a pretty one!
Unsightly is my opinion. It looks a bit like a toy and industrious. I think the same for handles. If I didn't know Bill was part of the GS3 I'd be hard pressed to believe the two machines had the same brains behind the product. I know the CC1 is based off another machine, but my point stands.
I like the "portafilter wiggle" that Mark Prince demonstrated in his Rancilio Silvia video a few years ago. Keeps the group quite clean but makes a terrible mess if your drip tray can't catch the water. I think the Quickmills have the 90 degree angle design to avoid this.
The point about the tank and drain is it doesn't necessarily have to be as it is. We live in a world with infinite possibilities, right? Why settle and adjust for the extremely awkward design? I don't want to make my coffee ritual a process of adjusting to my equipment--that just takes away from it all for me. But I understand there are some constraints with price so I guess I'm just stating the obvious.
I don't have the steam wand leak. From the invoice it looks like I'm on 10 months of ownership and so far it's the machine I've hung on to the longest. You're right in that it does what it advertises. I'm honestly no longer blaming the machine or second guessing myself. I buy beans and try them as an espresso, cappuccino, press, chemex, clever, and cold brew and just enjoy it.
I know it gets better with pressure profiling, more accurate temperatures, more precise grinders, calibrated tampers and on and on. I'll wait till i'm out of school. :-)
ggcadc Senior Member Joined: 25 Mar 2008 Posts: 147 Location: San Diego, CA Expertise: I live coffee
Espresso: QM Alexia Grinder: Mazzer mini E, Virtuoso,... Vac Pot: Yama 3 cup Drip: All of them Roaster: Behmor 1600
Posted Thu May 30, 2013, 9:17am Subject: Re: Is CC1 the best 58mm machine under $1000?
I loved my Classic for years, had two actually. Now that I have my Alexia(open box for 1k), I cant complain either. the gaggia (as well as most of those smaller machines including the CC1) suffer from mid shot temperature drops. there isnt enough material to maintain 190-205f through a whole shot. there is LOTS of data out there to support this. whereas an E61 based machine WILL have LOTS of temp stability. that is the difference your looking for. HX DB, SB, the difference with those is for steaming plain and simple. since I dont drink milk, and rarely make my wife a late, a SBDU works great for me (I actually steamed with it for the first time the other day, night and day from the gaggia).
this LN Cuadra is an HX machine that is new to me, i think the footprint of any HX would put me off.
fredk01 Senior Member Joined: 20 Feb 2012 Posts: 136 Location: Canada Expertise: Just starting
Espresso: Saeco Aroma Grinder: OE Pharos
Posted Thu May 30, 2013, 10:19am Subject: Re: Is CC1 the best 58mm machine under $1000?
... the gaggia (as well as most of those smaller machines including the CC1) suffer from mid shot temperature drops. there isnt enough material to maintain 190-205f through a whole shot. there is LOTS of data out there to support this. ...
Winnisk Senior Member Joined: 4 Jan 2013 Posts: 20 Location: Moonstone Ontario Expertise: I love coffee
Espresso: Silvano Grinder: Vario
Posted Thu May 30, 2013, 3:53pm Subject: Re: Is CC1 the best 58mm machine under $1000?
The most important thing about this machine is consistent temperatures are really precise temperature controls. For a single shot pull, this machine is rock steady on temperature - almost on par with the GS/3 in fact in side by side tests I've done with a Scace Device hooked up to it.
Carlitovich Senior Member Joined: 26 May 2013 Posts: 30 Location: NH, USA Expertise: I love coffee
Espresso: La Nuova Era Cuadra 006 Grinder: Rocky
Posted Thu May 30, 2013, 8:29pm Subject: Re: Is CC1 the best 58mm machine under $1000?
Excellent machine, but best under a thousand, not sure about that. There are some nice machines right around the 1k mark, the Cuadra is just under 1k and is an h/x. At its price point though and for its class it flat out slaps its competition in specs and performance ( Classic, Silvia etc).
I love it and its shot consistancy, but I wouldn't say its the best overall under 1k.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.