jgrietveld Senior Member Joined: 6 Apr 2013 Posts: 2 Location: Dublin Expertise: I love coffee
Espresso: Isomac Tea II
Posted Sat Apr 6, 2013, 10:41am Subject: Isomac Tea 2 - Lots of noise when flipping the main lever but no water suction
I have an Isomac Tea 2 which has always worked perfectly.
It hasn't been used for about 1.5 years until today. But after heating it (which was more noisy than I remembered) I flipped the main lever to get the water running through it, but no water came out nor where any of the tubes being filled up with water. The only result was a lot of noise coming from the machine.
Also the pump manometer wasn't showing any increase in pressure.
SStones Senior Member Joined: 24 Nov 2012 Posts: 474 Location: Canada Expertise: Professional
Espresso: Giga 5, ECM Giotto, Rocket... Grinder: Anfim Milano-Best Vac Pot: No :( Drip: Some $30 thing from Walmart Roaster: I buy pre-roasted.
Posted Sat Apr 6, 2013, 11:22am Subject: Re: Isomac Tea 2 - Dead Pump, Heated anyway.
So your pump has gone dry and will need to be primed and most likely replaced. It is possible that your boiler was heating nearly empty if it was awfully noisy, and your element may have been destroyed if it heated too long without being submerged. You might want to disconnect the heating element while you figure out the pump issue, unless you're certain the boiler is filled properly. While disconnected, test the element for shorts to ground at both leads with your ohmeter set to the maximum range (Like 200K-Ohms or whatever it has). If there's no conductivity at that range to ground, then the element survived.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.