DavecUK Senior Member Joined: 21 Sep 2005 Posts: 1,471 Location: UK Expertise: I love coffee
Posted Fri Mar 22, 2013, 10:03pm Subject: Re: E61 Lever Difficulty
Took the lever apart and lubed the cam and gaskets. Boy, that thing was jammed in there. It's like the gaskets inside the unit clung on to the lever, so when I was turning the lever I was turning the washers in the unit too. Anyway, after a little frustration loosening everything up, everything is back to normal. Thanks for the help, everyone.
Did you lube the actual valves themselves where they slide around in the body of the group, upper group valve and preinfusion valve. This is quite important for continued free movement and minimising cam/pin wear. One has a square and the other a triangular profile which slides up and down in round holes at the top and bottom of the group. it does require disassembling the group (mainly so you can properly dry the surfaces before using dow 111 on them), but it's not that difficult.
Posted Sat Mar 23, 2013, 10:02am Subject: Re: E61 Lever Difficulty
No problem. The point I meant was that the areas to be sure to lube are between the cam and the valves they actuate; where the pins rub on the cam as shown in the video. That should be done two or three times a year, and definitely every time after backflushing with detergent.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.