padremiguel Senior Member Joined: 13 Jan 2013 Posts: 1 Location: Tucson Expertise: I live coffee
Posted Sun Jan 13, 2013, 10:52am Subject: Re: Krups xp2070 sends water straight to catch basin
Your symptoms description and repair instructions are spot-on. My unit appears to have incorporated some improvements. First, no torx screws (just phillips). There are 7 screws beneath the bottom cover securing the sides. Most importantly, the double bypass valves have been improved. The retaining cap for the spring/plug have been redesigned. They are one piece.
I started with valve #2 (randomly). I could find nothing wrong. I can tell you that finding the spring and small metal rod after they fly onto berber carpet is a unique challenge. At this point, I resorted to magnification to examine the two valves. I could see no difference between the two. They both looked fine.
I finally saw that the spring and plug in valve one were installed backwards.This explained why my symptoms were intermittent for two months. I occasionally had "launch failures" trying to produce espresso. A few days ago, it refused to launch at all.
I bought my "manufacturer refurbished" unit at "Big Lots" for an insanely low price. Yes, these items are a gamble but I took the bet. My hunch is that when it was returned to Krups, it worked fine when they tested it. They had no reason to look further. I am sure they have a category for "user error."
Bottom line - even in the "improved" units, there remains a potential problem with the double bypass valves. Again, there is a simple fix. Remove the the unbroken retaining cap and turn the spring/pin around with the spring going in first and the pointed-end of the pin facing inwards.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.