SStones Senior Member Joined: 24 Nov 2012 Posts: 518 Location: Canada Expertise: Professional
Espresso: Giga 5, ECM Giotto, Rocket... Grinder: Anfim Milano-Best Vac Pot: No :( Drip: Some $30 thing from Walmart Roaster: I buy pre-roasted.
Posted Wed Dec 19, 2012, 7:28pm Subject: Re: what is wrong with my Expobar office control?
If the control panel is still working but steam and hot water aren't, then your boiler pressure (And temperature) has just dropped to the same as the room it's in, the element isn't heating it up. Possibly it overheated when left on and the safety thermostat has shut the boiler down to protect it. You can probably find the thermostat somewhere on the surface of the boiler and press the button on the thermostat to reset it. If it overheats often, however, it is a sign that something else is wrong and needs to be looked into. Does the machine heat up? If it gets hot and the steam/water valves don't let water out then the boiler is dry or the valves are blocked or something... Need more info, but it isn't good to have the element on if you suspect that the boiler may be dry. If you lean the machine forward and back with the reservoir removed, can you hear the water in the boiler sloshing around?
The asterisk to the right of the other buttons is probably just a start/stop button. Not metered like the other four buttons that can be set to cup-volume sizes. When the machine is brewing on asterisk, it won't shut off on its own, you have to press it again (If it's like the old capresso 401s). I have never played with a flow-metered expobar, sorry.
I hope this helps. It might be a good idea to contact the seller, they should be more familiar with your machine than I. I'm just imagining that it's like the non-automatic, e-61-vertical boiler-HE machines that I have seen. Post again if it will help.
JasonBrandtLewis Senior Member Joined: 9 Dec 2005 Posts: 6,567 Location: Berkeley, CA Expertise: I live coffee
Espresso: Elektra T1 - La Valentina -... Grinder: Mahlkönig K30 Vario -... Vac Pot: Yama 5-cup Drip: CCD, Chemex Roaster: No, no, not another...
Posted Thu Dec 20, 2012, 7:54am Subject: Re: what is wrong with my Expobar office control?
I'm sorry for your problems. I bought a new Expobar Office Control and had to return it to the vendor. Not only did it arrive DOA, but no amount of over-the-phone assistance could revive it . . . this is why I've long said that, while the Expobar Brewtus is a well-made machine with a proven track-record, machines "lower" in their line seem to have QC problems.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.