ryecarr01 Senior Member Joined: 2 Nov 2011 Posts: 44 Location: north east Expertise: Just starting
Posted Wed Nov 28, 2012, 4:32pm Subject: visacrem pstat problem
ive come across a machne i am quite unfamiliar with and uses a concept i am also unfamiliar with to regulate the machines boiler pressure.
all the machines i have ever come across have had a pressure stat, with adjustable screw to adjust the boiler pressure.
this machine however does not. it is a Visacrem V6 machine. I have located a cable/tube which goes from the boiler into the machines PCB, im am fairly sure this is what is regulating the machines pressure. what i am wanting to know is how do i adjust the pressure??
the machine is showing a fault on the digital display 'machine overheating'. the display also shows the boiler temperature as being 144'C.
the fault message appears as soon as the machine reaches this temperature and then disappears once pressure drops and the heating element kicks in to regain pressure, and then appears once pressure is achieved.
the gauge on the machine shows the pressure sitting nicely in the green zone, i am just wanting to lower the boiler temperature slightly so see if it clears the fault showing up on the display.
calblacksmith Moderator Joined: 25 Nov 2007 Posts: 7,312 Location: Riverside, Ca, U.S.A. Expertise: I live coffee
Espresso: ECM Veneziano A1 Grinder: Many different commercial Vac Pot: 40s era Silex Drip: Milita, Bunn&Curtis... Roaster: Cast iron pan, gas burner
Posted Wed Nov 28, 2012, 5:20pm Subject: Re: visacrem pstat problem
If the cable goes to a pcb and it has a digital readout, I highly suspect that it is PID controlled. Other than this real big guess I'm sorry to say I can't help much. If all that it needs is temp regulation' you could add an aftermarket PID but you would need to design it yourself. I would guess all you would need to do is to find a place for the thhermocouple and wire the heater to a SsR and the PID unit. You might get lucky and all the rest of it might work OK. Have you played with it much in this respect?
In real life, my name is Wayne P. Anything I post is personal opinion and is only worth as much as anyone else's personal opinion. YMMV!
Feed the newbs, starve the trolls and above all enjoy what you drink!
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.