mariog7 Senior Member Joined: 7 Mar 2011 Posts: 183 Location: NJ Expertise: I love coffee
Espresso: Quickmill Vetrano Grinder: Vario
Posted Wed Nov 21, 2012, 1:22pm Subject: Nickel Plating Worn on E61 "Mushroom"
Hello, all. I have a 1 year old Quick Mill Vetrano that I have descaled for the first time. I took apart the E61 to check for scale (this is the most suceptable part of the entire machine). If you are familiar with the E61 head, the "mushroom" the nickel plating seems to have started to ware in a few spots, and I can see the brass.
After descaling, I ran it with water for a long time, and noticed what appeared to be nickel flakes. After running water for a few more minutes, the flakes started to disappear.
Should I be worried that I will start ingesting nickel? Is this unusuall? Any thoughts on this would be apprecaited.
Posted Wed Nov 21, 2012, 1:44pm Subject: Re: Nickel Plating Worn on E61 "Mushroom"
The mushroom is not necessarily the most susceptible, but it is an easy-to-remove part that indicates the condition of the system in general. Once the plating on the 'shroom starts to come off it will continue to do so. When my VBM DS started doing that I took the part out to the garage and removed the rest of the plating using a powered wire wheel brush on a buffer motor. While the basket and coffee will filter out the bits of metal, If for no other reason, I would remove the plating to keep it from being sent through the rest of the group or clogging the gicleur.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.