yorel1 Senior Member Joined: 13 Feb 2012 Posts: 25 Location: Wellington NZ Expertise: I love coffee
Espresso: Brasilia Cappucino Del 1,... Grinder: La Pavoni Jolly Roaster: Going to try popcorn maker...
Posted Wed Nov 21, 2012, 11:15am Subject: Re: Brasilia Club Pump problems
Thanks for all your help Wayne.
The blockage was between the boiler exit and the solenoid part of the grouphead. I used tweezers to drop store bought descaler into the exit point and then dripped in just boiled water. I also used thin flexible wire to try to clear the solenoid end. In hindsight I think it was the solenoid end that was blocked as when I cleaned the solenoid it had almost blocked due to coffee buildup. The light bulbs should have come on then! I'll put that one down to experience.
I went to an oring distributer for the orings I replaced (boiler & shower block). They were about 1/2 the price compared to the online price here in NZ. I reassembled everything. Tested it. Leak from steam wand to boiler copper piping which was easliy fixed by tightening the nut (it had slightly loosened during disassembly).
Tested with a shot. Had my first 'gusher'. I had tamped too lightly....not enough practice with machine out of action. Retried, using a temp surf for the first time, and tasted an espresso. yummy! I've still lots to learn in pulling the shot & its going to be fun.
SStones Senior Member Joined: 24 Nov 2012 Posts: 440 Location: Canada Expertise: Professional
Espresso: Giga 5, ECM Giotto, Rocket... Grinder: Anfim Milano-Best Vac Pot: No :( Drip: Some $30 thing from Walmart Roaster: I buy pre-roasted.
Posted Sun Nov 25, 2012, 4:20pm Subject: Re: Brasilia Club Pump problems
In case you're still following this thread... Initially, with your clogged brewhead, you were hearing your pump build up pressure until it stalled and quietly hummed... You should try to force some descaler through your relief valve (OPV) to get it working again. When your dual-purpose boiler is exceeding 9.5 or 10 Bar pressure, the relief should be allowing the flow through abd back to reservoir. If your pump is stalling at less than 10 Bar, you will be needing a new pump soon, sorry.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.