Posted Fri Jul 27, 2012, 4:31pm Subject: Does the Vivaldi II no burn steam wand fit the Brewtus?
Hi guys, my dad's Brewtus has the no burn wand and I really dig it over my Brewtus' standard one. WLL said they don't have this part available, so the only other option I've seen is the Vivaldi II wand from Seattlecoffeegear and Chriscoffee.
Posted Tue Aug 7, 2012, 8:20pm Subject: Re: Does the Vivaldi II no burn steam wand fit the Brewtus?
Hi Todd, thanks for that info! I emailed Andrew this morning and told him the back story on your post. Is there any chance someone at your place can verify that the Expobar machines and the Vivaldi use the same wrench to install the steam wand nut? If not I'll give it a shot, but that would help me feel a bit more confident.
emradguy Senior Member Joined: 31 Mar 2011 Posts: 1,738 Location: Houston Expertise: I live coffee
Espresso: Izzo Alex Duetto II Grinder: MacapM4T, Macap M4, OE Lido,... Drip: Espro press; Aeropress Roaster: internet
Posted Wed Aug 8, 2012, 7:15am Subject: Re: Does the Vivaldi II no burn steam wand fit the Brewtus?
Is it possible you can just convert your existing wand to the "burn me" type? I did this with my Duetto, after someone else on here said it improved his steam 1000%, and it did mine too. All I had to do was take off the wand, remove the steam tip, and grab a small diameter plastic tube that was sitting inside the wand (using needle nose pliers). Then I just put it all back together and voila! That was free! However, if you decide to go this route, you'll need to buy a rubber insulator so you can adjust the wand position. Espresso Parts sells them for a few bucks - less than $10 for sure.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.
= No New Posts since last visit 