wizja Senior Member Joined: 14 Dec 2006 Posts: 3 Location: Poland Expertise: I like coffee
Espresso: Isomac Venus Grinder: Isomac Macinino Prof. Inox
Posted Wed Jan 10, 2007, 5:32am Subject: Isomac Venus extraction and manometer
I'm new owner of Venus and have some question concerning extraction and manometer readings. When I start the machine the manometer reads 0 bar. Then after few minutes when I just drop the heated water as a waste the manomenter goes up to ~12 bar. And now, when should I extract the coffee, when there is 0 or 12 bar? When there is 0 the pressure constntly goes up during the extraction, and when there is 12 bar I'm afraid that the pressure hits the coffee too strong. What is better?
nobbi4711 Senior Member Joined: 20 Apr 2005 Posts: 338 Location: Germany Expertise: Professional
Espresso: Dallacorte Mini EX4 Grinder: Casadio Instantaneous Vac Pot: none Drip: French Press Roaster: Mini-500/800N drum roaster;...
Posted Wed Jan 10, 2007, 8:22am Subject: Re: Isomac Venus extraction and manometer
The Venus manometer is a brew pressure manometer. So it's just fine showing 0bar when the pump doesn't work. It's also fine that when pulling a shot, the manometer goes up from 0 to 12bar. Pressure must be built against the coffee puck.
You can adjust the brew pressure over the expansion valve to 10bar, but you have to open the machine for doing that. But it's a little tricky:
The silicone tube with the number 40 goes onto the exp-valve. That must be screwed out a little. I don't know if it can be adjusted easily or if you hav to put a washer between cap and valve body. Maybe someone here has already done it.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.