Confusedguy Senior Member Joined: 16 Apr 2005 Posts: 78 Location: California Expertise: I like coffee
Espresso: Gaggia Carreza Grinder: Rancilio Rocky
Posted Sun May 29, 2005, 3:43pm Subject: Fuji PYX4 PID Controller
Anyone familiar with the above controller?
I recently bought one on eBay for the seemingly bargain price of $35. It looks like a larger version of the 1/32 Din Fuji controller sold by TTI Global and discussed on Murph's Silvia PID page. I already own one of those and it works fine.
After stuggling with this new one, I downloaded the manual and finally seemed to get everything set right. However, the SSR output does not pulse on and off--a continuous voltage is output which quickly sends the temp way past the SV. I've gone over the parameters again and again but cannot find what I've done wrong. I just don't think its broken--something needs resetting. If someone out there is familiar with this controller, perhaps a few questions would help discover the problem.
The 4 model does not have a universal output, but one that is factory set to a specific mode. The 6th digit (PYX4xOxx-xxxx) on the model number shows what the hardware output option is; if it's C or D, it's an SSR output, if it's E or F, it's a 4 to 20mA output, and you'll need an SCR rather than an SSR to use the unit.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.