Hi, the switch is finally working, the problem is that it sticks, having to pull it to turn it off, so defenitely I need to replace it. My dad lend me his ohm meter... How do I messure the switch terminals/pins? I have meassured the frothing bolier and it is 22 ohms... but have no clue on how to messure the 4 terminal switch... sorry but this hard head of mine has no experience with electrical circuits...
calblacksmith Moderator Joined: 25 Nov 2007 Posts: 8,194 Location: Riverside, Ca, U.S.A. Expertise: I live coffee
Espresso: ECM Vene. A1, La Cimbali M32 Grinder: Azkoyen Capriccio, Major Vac Pot: 40s era Silex Drip: Msl. Com. brewers Roaster: gave it a try, decided no
Posted Fri Sep 27, 2013, 10:20am Subject: Re: KitchenAid Proline Dual Boiler Machine - How To Replace Switches?
You will need to remove the wires from the switch to check it. Make a drawing of where the wires go before you take them off.
There are, as you know 4 terminals that the wires attach to. Start with the switch in the off position, that is, no steam setting. All you are checking for is; is electric power passing through the switch. You will either get 0 resistance or you will get no connection. Just like if you are holding the test leads in your hands, if they are not touching, you will not get electric flow, the meter will not show anything. Next touch the leads together, you will then get 0 resistance, the meter will go to the full scale deflection of the meter. These are the two conditions you are looking for, either connected or not connected. In MOST switches the terminals (when they have blade type terminals) are designed so that the blades of the terminals look like an = sign. that is, your switch will look like
A C _ _
Terminals A/B should be one pair of terminals and C/D should be anther pair of terminals. When you connect the test leads to A/B either one of two things will happen. 1, if they are NC terminals, you will get the meter to show power flowing or a 0 ohm resistance, or 2 you will not see any movement on the meter, just like if you do not touch the test leads together, then you have an NO switch.
A/B and C/D, would be, I would guess both NO connections, that is you do not see movement on the meter when you connect the test leads to the terminals. When you turn the switch on, I would guess that you WILL get movement and so, the switch is connecting the terminals together.
Make the check and let us know what happens. Remember, the wires must be off the switch, otherwise you will be seeing the circuit not just the switch.
In real life, my name is Wayne P. Anything I post is personal opinion and is only worth as much as anyone else's personal opinion. YMMV!
Feed the newbs, starve the trolls and above all enjoy what you drink!
Diveval Senior Member Joined: 13 Sep 2013 Posts: 24 Location: Guatemala Expertise: I love coffee
Espresso: Cimbali D1, Cimbali S1,... Grinder: cimbali Junior, gaggia MDF,... Roaster: Old German GMS
Posted Sat Sep 28, 2013, 8:07am Subject: Re: KitchenAid Proline Dual Boiler Machine - How To Replace Switches?
Hi! Very helpful, I have a NO switch. I found a similar switch that I adapted, it is a Single/double pole,ON/OFF Momentary NO. My machine is now working like new again! Thaaanks! It did not fit perfectlly so I hace to open a little bit the aperture were the switch comes ot, but works perfectly for USD8.00!
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.