Posted Sat Jul 20, 2013, 2:07pm Subject: Does this connection need teflon tape, an o-ring, or nothing at all?
Having completed the de-scaling, I am busy re-assembling my long term project - a Wega Nova EPU 1 (semi-auto sinlge group) and I got to this inlet connector block, which has 6 holes in it. 2 are plugged with hex-key caps. The other 4 are in use. What I don't understand is the connections. I only removed 3 of them for descaling and can't remember seeing any plumbers tape or O-rings. Looking at the untouched ones does not give me any clues either...
I can't see how these will seal properly without something! Any ideas? Pic attached... don't worry that pic is pre-descale... all looks much shinier now.
Posted Sat Jul 20, 2013, 2:45pm Subject: Re: Does this connection need teflon tape, an o-ring, or nothing at all?
As difficult as those fittings likely would be once the machine is assembled, I would clean all threads and use teflon tape. if the machine is as old as that looks, it might have had some sort of liquid or paste sealant that all flaked off during disassembly. Normal precautions apply in terms of keeping the tape from getting past the ends of the fittings and into the machine.
tracerbullet Senior Member Joined: 13 Feb 2012 Posts: 168 Location: Saint Paul Expertise: I love coffee
Posted Mon Jul 22, 2013, 12:08pm Subject: Re: Does this connection need teflon tape, an o-ring, or nothing at all?
Keep in mind the direction you wind the tape and how the fittings spin into the rest of the pieces, so that it doesn't just unwind as you spin things together.
Personally I'd go with "pipe dope", it's designed for this kind of thing. I used to work Quality at an engine manufacturing plant, and I'd teach the new builders the difference between the tape and dope and why they needed to follow the manufacturing instructions when one or the other was called out in regards to oil & fuel related subassemblies. Tapes are basically a lubricant, a way of getting fittings to tighten in further. They didn't do a whole lot for preventing leaks, that had more to do with the threads mechanically deforming slightly into each other and anything under high pressure tended to still leak if you didn't really crank it down. Pipe dope on the other hand would provide a leak proof seal even when things were just hand tightened.
If you do go the pipe dope route keep in mind the type and how much you put on especially as mentioned in regards to getting it into your water flow.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.