Posted Tue Jun 18, 2013, 10:57am Subject: NS Elli Matic stripdown and portafilter questions
I've got a few questions for those who've taken apart NS Elli's, and those who have modified portafilters to fit Elli's.
I spoke to a fairly knowledgeable local guy about fitting a normal NS portafilter to an Elli, explained the concept of "grinding the ears off a standard NS one", and he didn't seem to agree that it'll work, kept saying that the other portafilters are too small (diameter)... Does anyone have details on what portafilter can be used (ie from what machine), how it differs from the elli one, and how it's modded? My idea would be to make a bottomless portafilter using a dremel or drillpress. :)
On the subject of disassembling the entire boiler for cleaning: How long does that take approximately? Also, will I need consumables for that, or can one use standard vellumoid as a gasket?
Posted Tue Jun 18, 2013, 1:20pm Subject: Re: NS Elli Matic stripdown and portafilter questions
My Ellimatic is a 58mm portafilter, and the bottomless I have is a standard commercial 58mm with the ears gournd down (a little over-ground, actually, as it locks at about 3:30 rather than the 6 o'clock you'd normally want). An Oscar pf with the ears ground down will also work fine.
Taking apart the Ellimatic can take a little time and care. There are a couple of threads here and in the General forum on the process with photos detailing most everything. Those are what I used for reference when I stripped everything down and put it back together.
Not sure about the gasket, as I just picked up a replacement gasket from Espresso Parts. I would imagine any food-safe, sufficiently heat-resistant gasket material could be used.
Posted Mon Jun 24, 2013, 9:31am Subject: Re: NS Elli Matic stripdown and portafilter questions
I've had a read through several of the threads, and while there's no time indication anywhere (not that I saw), it does indeed not seem to be a very difficult operation to stripdown and rebuild the machine. I was also pleasantly surprised to discover that the local NS agents actually stock the boiler gasket, so no need to Macgyver something there.
I'll try get hold of a standard 58mm portafilter and see what I can make do to make it fit the Elli. If I run into trouble, I'll post again!
I'll post a pre-post pic once the whole story is done. :) All in the name of good coffee, learning, and fun.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.