These conversion instructions are great! Could I ask you to send me via email the template for the base plate as well? Did you have any problems on the electrical connections for the motor, or did you simply use the same connections as for the original Ulka Vibratory? I don't know what the terminals are on the motor to drive the rotary pump (haven't acquired it yet). (I've got a plumbed in Andreja, but the rotary conversion is very alluring)
It's been awhile, but here is the pattern. If you can't get it from here, let me know.
Nothing about this conversion was particularly difficult. No problems connecting the motor. If you plan to do it, I can review the procedure and help you figure it out. As I said, I used a Vetrano as the guide and wired and plumbed the Andreja to match that as closely as possible. Cutting the stainless burned through some drill bits and hole saws, but it was worth it.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.