Pictures of disassembly & lubrication here: https://picasaweb.google.com/107 538294644714513474/Handpresso?a uthuser=0&authkey=Gv1sRgCPH Bicy8w8-5Fg&feat=directlink
1) Remove by gently pulling, without twisting, the valve cap on the reservoir side of the unit. 2) Using suitable tool (e.g., snap-ring pliers), unscrew and remove valve chamber cover that has two small holes on the reservoir side of the unit. 3) Gently pull, while twisting in a single direction, valve to remove the valve the portafilter side of the unit. 4) Lubricate the metal portion of the valve with vegetable oil. 5) Lubricate both sides of the valve chamber in the body of the handpresso. 6) Replace the valve by reinserting it into the Handpresso from the portafilter side of the unit. Gently turn the valve while reinserting it. Turn the unit over and lubricate and replace the oring (that has just fallen out) on the metal portion of the valve. 7) Replace the valve chamber cover using a suitable tool, being careful not to overtighten. 8) Cycle the valve 15 times. 9) Seat the pump handle against the body of the handpresso and turn counter clockwise, unscrewing the pump from the body. 10) Remove the pump from the body, and extend the pump handle and lubridate the pump o-ring with vegetable oil dropped inside the aluminum tube. Reinstall the pump in the body of the Handpresso.
Feel free to resize the pictures and add them to this thread or insert them in this post.
Posted Sun Sep 22, 2013, 11:40pm Subject: Re: Handpresso Lubrication/Repair
Hi I was quite happy my Handpresso for about 2 or so years .... till stopped pumping. Before getting into coma (I still hope is not dead yet) the pump got stuck and then got loosen moving up and down w/o any force applied, as if some valve or inner o-ring failed. Saw your post but could not enter your picasa link , I'd much appreciate if you could help.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.