calblacksmith Moderator Joined: 25 Nov 2007 Posts: 7,675 Location: Riverside, Ca, U.S.A. Expertise: I live coffee
Espresso: ECM Vene. A1, La Cimbali M32 Grinder: Azkoyen Capriccio, Major Vac Pot: 40s era Silex Drip: Msl. Com. brewers Roaster: gave it a try, decided no
Posted Thu Oct 13, 2011, 6:09am Subject: Re: calling all Sylvia experts and techs.
Thanks for the info!
Yes the case is in good shape for 5 years old. There is the normal scuffing of use on the cup tray, drip tray that you would expect but from a few feet away, it looks pretty darn good.
Bill, thanks for the wiring photo, yes I switched the wires on the "back" side of the boiler. It didn't seem to make much difference though with the lights as the boiler light still stays on (and I would expect the heater too) though I left it warm up for over half an hour, that should have been long enough for it to heat up to operating temp. Heck, my 2.5l boiler on my ECM hits steam at about 5 min though it takes a bit longer to equalize the machine.
On heat up, there was a hiss coming from the back side of the boiler at the bottom flange, this was expected as there is a large buildup of calcium around the bottom of the boiler etc.
It is cooling down now, unpluged now. When it is cool enough to handle, I will pull the boiler/gp head out and take the boiler apart. A good cleaning, a gasket and possibly a PID to take over the temp duties and I should be into this machine a total of about $200, not bad in the long run.
I back flushed the gp hd yesterday and the 3 way valve operates properly and does not leak. The gp gasket needs to be replaced as I would think it is probably the one that came on the machine new!
One thing that had me a little concerned on warm up was that I could not see a OP safety valve. I see the three thermostats, the water inlet, the steam outlet and the pressure regulator but no safety valve... well not one that looks like the one on my ECM anyway.
In real life, my name is Wayne P. Anything I post is personal opinion and is only worth as much as anyone else's personal opinion. YMMV!
Feed the newbs, starve the trolls and above all enjoy what you drink!
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.