Posted Sun Oct 27, 2013, 7:49pm Subject: Re: V3 Silvia wand on Gaggia Classic?
On page 4-5, you'll see my Silva V3 modification in progress. It also says that I used a V_1422 adapter from EP. Granted, that you see in the photos is not the V_1422 as it arrived from EP. It was bored out to fit the spring and the small end was chased with a M10-1.00 die (not tap, like I've been referring, sorry) to fit the Gaggia fitting properly.
In my opinion, if you "just want to get the Silvia V3 on a Gaggia", this should be an easy "just put it on" installation. But the repercussions are it won't REALLY fit properly and we won't be able to use the V3 tension spring, which will introduce metal-to-metal contact.
If you want everything to fit properly, it'll take a little work. I have a machine-shop so it was a pretty easy mod, but you could do it with two tools: a drill bit to open up the hole for the spring, and a M10-1.00 die.
Posted Thu Oct 31, 2013, 8:03pm Subject: Re: V3 Silvia wand on Gaggia Classic?
The spring guide you posted looks like it's a replacement for the teflon one that comes with the wand. I would rather use the teflon variety to eliminate the metal-on-metal contact. Unless the mating surfaces are perfect and polished, I would not use it. Stick with the teflon stuff. If anything should happen, the teflon guide will be easier and cheaper to replace than the wand. I've have steam temps up to about 300F. Teflon can handle around 450F, so no problem.
The gasket also came with my V3 wand.
The spring also came with my V3 wand.
A friend ordered his V3 wand after following this thread and he also had to order a few extra bits. It was only shortly after I purchased mine. I think before ordering, perhaps it would be a good idea to call to ask because everything I needed came with my V3 wand.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.