Awe, c'mon. Not THAT bad an idea! I can see some pressure profiling opportunities in it like no other. It would actually be simpler than you may think to setup. I could go anywhere from real simple on the controls and dial in the dose and grind to a good shot at a consistent 25 sec. pull- to having complete computerized control over the pressure on the fly. I may just have to keep my eyes out for a lever that would support the motor assy.
Sorry to be so OT but this really has me thinking! Anyways got an offer in on a house and trying to keep my mind off of it ;>)
Well, I have a rotator cuff issue with my right arm, and if it aches too much, I just pull with mostly my left, or do a 2 hand pull. However, my Strega weighs tons more than your La Pavoni. You have a fine lever there, and +1 for getting the new burrset for your grinder. However, if you're having pain, I'd look for a nice pre-owned HX machine, like a Quick Mill Anita, etc. Machines like that can be had for less than 1 k, in very good condition.
Posted Sun Jun 1, 2014, 9:22pm Subject: Re: To old to pull?
I guess it's not an entirely unique idea then, what I'm picturing in my head is a much simpler design though. I was thinking of something mounted on a larger machine- but now that you mention it there may be a way to mount something with the grouphead mounts on a La Pavoni. I've got one I've been meaning to finish assembling, I think I need to ponder on this for awhile. I think I'll keep a lookout for LP's sold for parts though, I may want to chop up a couple of group heads experimenting.
Not trying to cut you out of the loop...LOL, just that tinkering time on my part would be the real first step. If I come up with anything worthwhile I'll let you know, I really do think there could be something to this!
Posted Thu Jun 5, 2014, 1:24am Subject: Re: To old to pull?
So my thinking so far and a bit of chatting with co-workers has got me contemplating that a pressure thermistor on the piston and a current monitor/regulator on the motor would be pretty easy to setup. I'm going to do some poking around this weekend (Mcmaster-Carr and such) and see what I might come up with for a motor/gearbox that would fit the bill.
The numbers do NOT correspond from machine to machine -- they only indicate relative grind size (i.e.: "0" is finer than "1," which is finer than "2" . . . on your machine; but a "1" on your machine will not be the same as a "1" on someone else's).
Jaypavoni Senior Member Joined: 30 May 2014 Posts: 8 Location: usa Expertise: Professional
Posted Tue Jun 17, 2014, 1:05pm Subject: Re: To old to pull?
its not bottoming out, it is on the finest it can get, I never got new burrs. I just cleaned up the grinder, actually did not do much but look in and spin it with a knife and put back to gather and it suddenly works now and the machine pulls perfect!
calblacksmith Moderator Joined: 25 Nov 2007 Posts: 8,151 Location: Riverside, Ca, U.S.A. Expertise: I live coffee
Espresso: ECM Vene. A1, La Cimbali M32 Grinder: Azkoyen Capriccio, Major Vac Pot: 40s era Silex Drip: Msl. Com. brewers Roaster: gave it a try, decided no
Posted Mon Jun 23, 2014, 6:12am Subject: Re: To old to pull?
So, in reference to your first post, you have had the GRINDER 30 years and never changed the burrs? It is due and perhaps a little overdue for burrs, hey just an opinion here :P NS makes a good grinder but even their grinders need to be cleaned, often. The oils tend to gum up things and then go rancid affecting the flavor of the drink. I had an MDX for a while, good grinder and I like the adjustment system more than Mazzer SJ (I have had several) but in the cup, they were about the same.
In real life, my name is Wayne P. Anything I post is personal opinion and is only worth as much as anyone else's personal opinion. YMMV!
Feed the newbs, starve the trolls and above all enjoy what you drink!
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.