alterview Senior Member Joined: 18 Feb 2013 Posts: 18 Location: Eugene Expertise: Just starting
Posted Thu Feb 28, 2013, 10:00pm Subject: Re: How can I remove the varnish/lacquer from a La Pavoni Pro Copper/Brass...?
It may be that you have chipping of lacquer where the base meets the plastic. Depending on what's actually happening / how bad the problem is, I would probably not recommend the dremmel or wire wheel, but instead use some naval jelly or other rust dissolver.
Posted Sat Mar 2, 2013, 1:11am Subject: Re: How can I remove the varnish/lacquer from a La Pavoni Pro Copper/Brass machi
There's a debate on another forum as to whether these boilers were actually copper. I thought they were copper plated brass, as the machines I've seen all seem to have brass boilers. From the inside pic of the boiler it looks like brass. The outside looks like some copper plating still on with the underlying brass showing. Can you confirm this? The lever looks like brass. The pink tone is due to the acid eating away at the zinc in the brass.
I thought the PV boilers were all brass, copper plated, chromed or otherwise but apparently, some earlier Pavoni boilers were copper but most were plated brass. Elektras were always plated brass boilers. Whatever, Elektra or Pavoni they all had a clear coat (Lacquer) finish.
Paint stripper will remove the lacquer. If it's a copper plate over brass there will be a nickel plate on the brass. The stripper will leave the nickel plate alone.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.