Posted Thu May 30, 2013, 3:22pm Subject: Grind Retention on Vario after cleaning.
So I used some compressed air to clean the grounds out of the vario and now i'm looking at getting 14g out when i put in 16g (this is after i tap the machine to get the loose grounds). In the past, I would put 16.2 in and get 16.10 out.
First, am I supposed to clean the chute this way?
Second, what is the best way to 'fill the gaps' so to speak so I can get better grind retention results in the future? So far, its been like this over a week. I expected maybe the first couple times but still?
Third, should I be tapping the grinder like mentioned?
greekespresso Senior Member Joined: 27 Jul 2011 Posts: 176 Location: Ptolemaida, Greece Expertise: I love coffee
Espresso: Rancilio Silvia V3, Gaggia... Grinder: Mahlkönig Vario Home, Anfim...
Posted Fri May 31, 2013, 1:23am Subject: Re: Grind Retention on Vario after cleaning.
With my Vario I had similar behavior with only two or three types of coffee beans (specialty grade from Costa Rica). In all these cases I had to go very close to the limits of the finer range (too light roast maybe?). So my short answer is that the high retention you observe is coffee dependent. I should note here, that when a high level of retention was observed the excess of that coffee was expelled from the grinder at the next grinding session(s) (i.e putting 16g in and getting 17.5g out).
Posted Fri May 31, 2013, 8:10am Subject: Re: Grind Retention on Vario after cleaning.
I've been tinkering with it.
But as to an original question. Do you smack the machine at all? I sometimes tilt it a little and give it a slight smack to makesure all the beans fell in the chamber. Not sure if this hurts it or not.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.