For the second Polder, and surfing, this post. You take the thermometer apart. You may need to heat the steel probe to soften the plastic where it holds the probe. You can find a place to put the wire through the front or top and get the thermistor the boiler. Sometimes you can wedge it in a spot by an existing fastener, or try high temperature foil tape or glue.
You may want to start another thread. The title of this one will not help future searches as it is not more about the Gaggia Classic. OTOH you have the info for OPV and temperature and just need the V1 Silvia steam wand :) Until the PID.....
Posted Thu May 9, 2013, 5:52am Subject: Re: Before I open this Preciso
Thanks a lot D4F and Brainl. Can't wait to do this stuff and excited to see the results after I get a little bit more insight to what's going on with with T and P. Gotta get through this week and tuesday of next before I can sink some time into playing with these and gathering the materials I need. At that point I'll also be starting on a small roasting/cooling setup (...because why not?) so I can enjoy the process and not burn through $18 / 12oz beans as I experiment.
Thanks for the advice, I'll be following those directions.
Posted Thu May 9, 2013, 5:57am Subject: Re: Before I open this Preciso
Regarding the Preciso again, I'm weighing beans right before I grind. A +/- 0.01g scale should arrive today so I can be pretty accurate. I'm not adjusting the burs at all without the machine on (and usually with some beans in it) but after I grind a pre-measured dose I obviously want to grind all the beans I put in the hopper. Is it bad for the grinder if there is a second (really just 1 or 2 pulses) of movement after the last bean has been sent to the Undertaker? I'm not continuously grinding with nothing in the hopper but there is definitely a discrete moment when its empty.
CMIN Senior Member Joined: 14 Jun 2012 Posts: 1,377 Location: South FL Expertise: I like coffee
Espresso: Crossland CC1 Grinder: Baratza Preciso
Posted Thu May 9, 2013, 6:20am Subject: Re: Before I open this Preciso
No not at all, it's fine. I single dose, and purge (keep on or press the button a few times after grinding) to get the left over grounds out. Usually just tip it forward a bit and give it a little wack while purging = basically 0 grounds retention.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.