Posted Wed Apr 10, 2013, 6:57am Subject: Grind settings on the Macap MX
Yesterday I got some new Burrs for my Macap MX grinder and once I had it calibrated I noticed that there were maybe only 12 settings within espresso range before the burrs touched. Is this normal for an espresso only grinder?
I plan to use it for drip and possibly press so it's not a lose lose. I was just a bit surprised. Has anyone had this experience?
Posted Wed Apr 10, 2013, 7:59am Subject: Re: Grind settings on the Macap MX
It was worse when I got it because the burrs were worn. Bought it used. UPDATE: Just tried to make an espresso. 2 notches from 0 it was still too course. The burrs are new. I'm gonna look at everything again and see if maybe the burrs aren't leveled.
Posted Wed Apr 10, 2013, 7:04pm Subject: Re: Grind settings on the Macap MX
You might want to email Macap support through their website. They actually respond within a day or so and seem willing to help customers (at least that was my experience when I had questions about my M4s). Given the high quality and performance of my Macaps, I'd be surprised if that grinder can't perform much much better than you've experienced thus far.
. Always remember the most important thing is what ends up in your cup!
Posted Wed Apr 10, 2013, 9:14pm Subject: Re: Grind settings on the Macap MX
I've re installed the new burrs and re calibrated. I was able to pull good espresso. I guess because it's a discontinued stepped model it would explain the lack of "steps" on the fine side. Regardless I am pulling good espresso now. :)
Posted Mon Apr 15, 2013, 1:37pm Subject: Re: Grind settings on the Macap MX
I will post one later. Although there aren't a great amount of steps for espresso. I have been able to pull well with different coffee's. Turns out I was trying to dial in a very light bean... Completely choked out a FC pull. I should be able to use this grinder for all types of coffee. :) Going to dial in manual drip next. then French Press.
ronburleson Senior Member Joined: 3 May 2012 Posts: 19 Location: Corona, Ca. Expertise: Just starting
Posted Tue Apr 16, 2013, 6:54am Subject: Re: Grind settings on the Macap MX
I have an Elecktra which is a rebadged MX. If I close it all the way down I can choke my machine, but it's only a couple of clicks back to make espresso. It works fine for me for espresso, drip and anything in between, but there is no a lot of wriggle room down on the "espresso end" of this machine.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.