mariog7 Senior Member Joined: 7 Mar 2011 Posts: 218 Location: NJ Expertise: I love coffee
Espresso: Quickmill Vetrano Grinder: Vario
Posted Sun Feb 17, 2013, 7:03am Subject: Dull Burrs Producing Horrible Tasting Espresso
Haven't pulled a good tasting shot for months now and it was driving me crazy. Cleaned out my Vario today and checked the burrs. Seemed very dull to me - I can drag my finger across them with no resistance and they felt smooth, not sharp. Vario is only a year old, but I do recall a couple of rocks going through my Vario a few months back. My small artisan roaster doesn't have a machine to filter out rocks and debris... So I tried extracting the same beans through my Encore (burr grinder that I use for drip) and the taste was spot on once again! So I'm assuming my dull burs are the culprit for crappy tasting espresso. Strange, because I could indeed grind fine and consistent, the only sign of dull burrs was bad tasting espresso.
Just curious if anyone else could attribute bad tasting espresso to dull burrs?
And does anyone have a procedure to replace them or do I simply unscrew the 3 screws holding them in place?
Jmanespresso Senior Member Joined: 18 Jan 2009 Posts: 2,151 Location: Westchester NY Expertise: I live coffee
Espresso: Alex Duetto II Grinder: Compak K10 - Vario Vac Pot: Yama-SY5/SY8/TCA5 Drip: V60, Beehouse, CCD Roaster: Hottop B
Posted Sun Feb 17, 2013, 9:51pm Subject: Re: Dull Burrs Producing Horrible Tasting Espresso
Well, you couldnt. If its out of alignment, it would be a defect, or something caused it to break(possibly a rock). But i dont personally know of this happening to anyone so I wouldn't worry just yet.
the only thing might be, is the top burr, is held in place by supports that the burr itself locks under. Sorta hard to explain, but kinda how a portafilter locks into a grouphead.(hard to illustrate, but once you remove the hopper you'll see clear as day how it works) If that was installed improperly, it could be slightly out of alignment. Its easy to remove the top burr, make sure the mounting points are clean, and re-install it, but do so at your own risk.(its easy, just know there is always the chance of breaking something when you take it apart, so be aware of that before you do so)
Then again, dull burrs certainly COULD be the answer as well. Im just throwin out another possibility.
Follow Your Bliss
Coffee makes your constantly overcome your prejudices and re-evaluate your own "received wisdoms" when it comes to judging cup flavors. -Tom Owen, SweetMarias
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.