jdgriswald Senior Member Joined: 5 Oct 2012 Posts: 4 Location: Washington State Expertise: I love coffee
Posted Sat Oct 6, 2012, 5:22pm Subject: MDF lower burr mount removal.
I just picked up an older Gaggia MDF (metal body, friction fit hopper) from CL and it needs serious cleaning under the lower burr mount. This version has the square brass post as opposed to the nut. It is supposed to be a left hand thread, but I have found no way to keep the rotor from spinning to allow removal. If anyone has solved this issue, please share. Thanks
CoffeeMills Senior Member Joined: 21 Feb 2012 Posts: 32 Location: USA, Canada Expertise: Professional
Espresso: la Pavoni Professional Grinder: Mazzer Mini Drip: Gravity Cone Roaster: 49TH //
Posted Sun Oct 7, 2012, 8:00am Subject: Re: MDF lower burr mount removal.
Begin at lower bur disc. Three flat head screws hold the bur in place. These may be coated in rancid coffee oils and grinds, so scrape out flat slot for screwdriver to fit into. Remove all three screws. Lift out bur disc. Again, there may be resistance due to coffee build up. Careful not to scrape or damage the steel bur disc. The brass mounting unit should not be removed until every spec of coffee is vacuumed out from chamber. Here's a picture from another post. Good Luck.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.