Posted Mon Oct 1, 2012, 4:19pm Subject: What To Do When "Grabit" Fails?
Ay yay yay, this grinder's driving me nuts. I wanted to swap out the burrs for a new set but of course the screws were super stuck; I posted here for counsel regarding food-safe penetrating oils to help get them going, and I do appreciate the info & entertainment. :) In the end it was easier to find a manual impact driver, although I was considering using both. Now I wish I had!
The impact driver proved to be worth every penny of its mere $20. Thanks, Wayne, for that tip -- I'm happy to have it, and it did great, but not great enough. It helped me knock 5 out of 6 screws right outta there, but the sixth was awfully stubborn. I then went for the ol' "Grabit" screw extractor, which has never failed before but which I was too concerned about damaging the burr carrier to use right off the bat. Emboldened by my impact driver success, I started working on the stuck slotted screw with the Grabit, but no dice! I'm just wearing down the head without making any kind of tread for the grabbing side of the bit to grab.
If the head of this screw is worn totally away -- am I then the one that is screwed?
calblacksmith Moderator Joined: 25 Nov 2007 Posts: 8,042 Location: Riverside, Ca, U.S.A. Expertise: I live coffee
Espresso: ECM Vene. A1, La Cimbali M32 Grinder: Azkoyen Capriccio, Major Vac Pot: 40s era Silex Drip: Msl. Com. brewers Roaster: gave it a try, decided no
Posted Tue Oct 2, 2012, 7:15am Subject: Re: What To Do When "Grabit" Fails?
You are now into "advanced screw removal" LOL!
Sorry about the troubles and I am glad that the impact driver helped.
The next step is to drill out the center of the screw so that a screw extractor can be inserted and you might get it to work. These look like a screw that you turn the other way, they screw down into the hole you drilled and as they get tight in the same way the screw loosens, it will unscrew the stub of the screw. I have about 50% luck with them. After that, it is drill out all of what is left, the hole is drilled out larger and a threaded insert is installed, not for the faint of heart and it helps if you have done it before.
mavrick1903 Senior Member Joined: 17 Mar 2011 Posts: 75 Location: Madison WI Expertise: I love coffee
Espresso: Isomac Relax Grinder: Nuova Simonelli MCF
Posted Tue Oct 2, 2012, 7:53am Subject: Re: What To Do When "Grabit" Fails?
If you can drill the screw down to where the head meets the shaft, you might be able to remove the stubborn part, exposing a portion of the shaft. with luck, the reduced tension may also allow for backing the screw shaft out. I've had luck with this technique in the past (not on a grinder, but principal is the same).
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.