Posted Fri May 16, 2008, 8:39pm Subject: Mazzer Super Jolly – how to find zero, and estimate for initial setting?
I tried searching, but didn’t find what I’m looking for (but I’m sure its there somewhere). I got my replacement SJ burrs today from Chris’s Coffee, and will get them installed Saturday.
How do I find the zero? Ensure they are not touching, start the grinder, and slowly lower the burrs until I barely hear them touching? Will letting them touch for just a bit hurt them?
Once I find the zero, about how far do I back off experimenting for espresso? On the adjustment collar number scale, is it about ˝ a number? About 1 number? A lot more? I realize “it depends” will be the exact answer, but I’d like a place to start so I can do trail and error from there.
And when I go courser for drip/French press, about how many numbers should I back off from espresso, again as a starting point for trial and error?
I’ll use tape or find some other method to mark the settings so I have baseline references in the future.
Posted Sat May 17, 2008, 4:08am Subject: Re: Mazzer Super Jolly – how to find zero, and estimate for initial setting?
kelmw Said:
How do I find the zero? Ensure they are not touching, start the grinder, and slowly lower the burrs until I barely hear them touching? Will letting them touch for just a bit hurt them?
I'd try somehwere between 1/4 turn and 1/2 turn of the collar (between 90 and 180 degrees). I currently have a Super-Jolly set for drip coffee at ~90 degrees courser than I had it set for espresso
Posted Sun May 18, 2008, 4:47pm Subject: Re: Mazzer Super Jolly – how to find zero, and estimate for initial setting?
Jon,
Thanks for the reply. I installed the burrs, and spun them by hand to find zero, then went courser, turned it on, and slowly worked toward that same spot. The zero was in the same spot. I put a labeler sticker on the frame next to the zero on the collar, and now I'm working the espresso, vacuum pot and french press settings. Sorry, I don't have fresh beans on hand, but I plan to order from this business soon. http://www.kivacoffeeroasters.com/
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.
= No New Posts since last visit 