Okay okay okay... a few questions. In case the elektra wasn't good enough, you've also got a novecento (or so I believe it to be...)
The second one isn't so much a question, but a comment... the cuisinart; the poor guy doesn't even stand a chance sitting next to the first two. It's like sending whoopi goldberg on after billy crystal at the oscars!!
Posted Sat Aug 21, 2004, 3:42pm Subject: Re: Espresso Shrines
Yep ! Just a "K" type thermocouple attached to the boiler top just near the left hand thermostat. Plugs into matching digital thermometer.
I had a good look at Randy G's experimenting on taste verses pulling the shot at various boiler temps on the Silvia. After reading it and trying differing temps I now use 212 deg F (100 degC) as the temp to hit the brew button.
This happens around 33-35 seconds (on my machine) after the lower thermostat clicks the element on (light on - after steam wand bleed) ....
I can now also bleed steam wand to get dry steam and then wait for max steaming temp when using large jug ..when making 4 lattes/cappas at once. The steam temp gets up to 300 deg F (150deg C) before element clicks off.
When steaming large amounts of milk (over 1 minute steaming) the boiler temps settles on about 250 deg F (120 deg C) for the duration.
It was easy to install and is easily removed ...I can truely temp surf instead of time surf. I have another port in the thermometer to which I'm connecting another thermocouple to finally see brew temp at the portafilter verses boiler temp. Hoping to get around 195 deg F (90 deg C) at basket consistantly but need to know what temp boiler is at for 195 at basket.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.