But if you really want to get technical, I guess what the Brikka makes is technically called "moka". It makes no sense to me getting into these technicalities though, and whether or not it's called moka or espresso doesn't really make any difference to me.
As I said, I no longer feel the need to compare the drink I make with the Brikka with the drink I get at a café, unless I'm asked how it does compare, which is pretty well, if not better. It's a superb coffee making device in its own right . . .
I stand corrected. How did I not come across this!
So, should we call it tea?
Call it mud if you like! Ultimately, words are just words. I guess I just call it espresso (along with pretty much anyone else who uses the Brikka?) because a) to me I can't tell any discernable difference in flavour to espresso from a machine, b) because if I called it moka, people would likely say, "Oh, where's the chocolate?", and last but by no means least... c) because Bialetti themselves call it espresso...?
No one has said that you can't get a good cup of coffee with a Brikka. You certainly can! You can also get good coffee using a siphon, a press pot, or a pourover. But none are espresso.
And I wasn't suggesting that anybody has. For my taste, none of those quoted methods really float my boat. And what's more, the longer brewing time leads to more caffeine extraction, which I really don't like. With my espresso, or should I say moka, I don't get this nasty kick. But coffee is a highly personal thing.
No one is trying to debate you.
If no one was trying to debate me, we would not be having this conversation. Debate is actually good, but I was hoping not to have to debate these particular areas.
And your expertise is . . . what, exactly? How many years has it taken you to develop this vast set of knowledge?
What makes you think I've developed a vast set of knowledge? Because I dared to have the cheek to stray onto a coffee forum and utter my advice in a remotely eloquent manner? If you read back a few posts you'll find that I said I worked a little bit in a café and the Brikka is currently my one and only espresso (whoops, did it again!) making device. So I think it goes without saying that my expertise is minimal, and I would never try to fool people into thinking otherwise. But I like to think I'm a fast learner, and have the humility to share my honest opinions whilst at the same time listening to others'.
Well, a brikka doesn't taste at all like as espresso, but it can taste awfully good!
A couple of months ago I'd have totally agreed with you. But now I'd have to strongly (forgive the pun) disagree. But as none of us have any real way of proving this on paper then I guess we'll just have to put it down to our own taste buds. Anyway, have you tried the methods I've shown? I'd be interested to hear your feedback on them.
No one has ever said it takes £1,000's (or $1,000's or €1,000's) to make great espresso at home.
You're probably right. In fact what the heck, you are. But as I also said previously, if I was going to buy an espresso machine I'd want to be able to pressure profile with it. Correct me if I'm wrong, but these facilities don't come cheap. But hey, not everybody needs this facility to appreciate their coffee. I just like to be able to monkey around with things.
It certainly can be. There is no debate about that.
Great, we agree at least on something! :)
At the end of the day, all I'm really trying to achieve here is to get people to see the bigger picture and not get bogged down in the philosophy of it. I had hoped people would share their techniques, and maybe even videos. Since there are videos like this one without important questions being answered...
coffeeapostle Senior Member Joined: 5 Feb 2013 Posts: 18 Location: UK Expertise: I love coffee
Espresso: Bialetti Brikka 2 cup Grinder: Krupps GVX231
Posted Thu Feb 7, 2013, 2:32am Subject: Re: Bialetti Brikka: getting that elusive crema
If I had a decent espresso machine, then a Brikka would merely be a cute little now-and-again alternative, or an after dinner novelty.
I've found that by reducing the water quantities to way below the line, I can strengthen the flavour of the coffee, and I can't deny that it makes it extremely intense, miles more so than a regular moka pot. I guess filling it to the recommended line would give you what I guess would be equivalent to a "lungo".
What machine do you have?
One man's meat is another man's poison. ~Lucretius
I have an brikka 2 Cups too. Today i cleaned the crema valve. Now i want to screw the valve back on. But i did not check how firm/hard the valve was mounted. Have i to screw it till you can screw it no more or must there be some space for the crema ? Can someone hell me ?
ingk Senior Member Joined: 19 Jul 2014 Posts: 2 Location: Melbourne Expertise: Just starting
Posted Sat Jul 19, 2014, 1:25am Subject: Re: Bialetti Brikka: getting that elusive crema
Thanks for the thread..I have an Expobar machine that I use at home. But have been searching for a portable system for use whilst away. I have tried a few cheap capsule machines but have not been impressed. Have fond memories of a stove top unit I had years ago and after searchining on line decided to give the Brickka a go. Your review and comments have been great. It may not be expresso, but much better than Instant!!
canuckcoffeeguy Senior Member Joined: 22 Aug 2013 Posts: 259 Location: Burlington, Ontario, Canada Expertise: I love coffee
Espresso: Bezzera Magica, Mypressi... Grinder: K10PB, Vario, Hario Slim Vac Pot: I have a Dyson vacuum, but,... Drip: Aeropress, Bialetti Brikka,...
Posted Sat Jul 19, 2014, 10:50am Subject: Re: Bialetti Brikka: getting that elusive crema
Enjoy your Brikka. They're great little devices.
I have the 4 cup Brikka and have tweaked many different variables over the course of many cups.
Here's my 4 cup routine for reference . Will be different ratios for 2 cup version. I use room temperature water, counter to the boiling water suggestion for other Moka pots. Remember, the Brikka's special valve makes it behave in mysterious ways.
-Use 25 to 28g of beans -Grind medium to coarse, less uniform is better in my experience -Use the water measuring line in the upper chamber, and no more water than that(changing the water amount can affect brew time/pressure) -Use medium high heat, closer to medium (6.5 on my flattop ceramic stove with a maximum of 10) -Take off heat when it starts filling the upper chamber and pour until it empties (coffee will continue to sputter out as you pour)
I've even done this with my Hario Slim for grinding, on a coarse for press pot setting, and it worked well. Not bitter, full flavored, and clean.
And I would still recommend fresh, quality beans. I use the same beans I pull as espresso, or for French press, and the Brikka does them justice.
***And don't tamp the grinds. Let them settle into the basket evenly, a light tap on the basket is ok, but don't pack it tight. Level it off and that's it.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.