Posted Mon Jun 24, 2013, 2:44pm Subject: Re: Moka Pot grind?
My favorite variable is water temperature. Does it matter? The Italians say to start with cold but it is a common suggestion to start with heated or boiling water (never at a specific start temperature though).
It doesn't matter, although some people will insist that the coffee grounds suffer from the gradual heating process if you start with cold water. Bear in mind that in Italy this is a common or garden device just to get the job done without being too finicky. Load with cold water from the tap (faucet). Fill the basket with coffee, screw together. On the gas and light it - do something else until it starts to gurgle then turn off the heat. You will have found out that the S/S ones cool down more slowly than the traditional aluminium ones, so with those you have to anticipate the brewing point a bit earlier. S/S is easy to clean, but to use I prefer the aluminium ones.
Different pot geometry I guess. I have ranged about ±25% from valve level in my pot without the water touching the grounds.
One of my 6 cup pots (S/S - no manufacturer mark) has the safety valve (fill line) just at the bottom of the basket, in a couple of the others it is lower. It would work with the others, but not that one.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.