Posted Wed Jan 9, 2013, 7:09pm Subject: Re: using an 8-cup french press to make only one cup
The recommendations I've seen all say to get good results you need to make the volume the press is designed for. I've used fp for many, many years, but honestly, never tried (or at least I don't remember ever trying) making anything less than the press' designed intent (I must have learned that early on somewhere).
. Always remember the most important thing is what ends up in your cup!
jbviau Senior Member Joined: 12 Jul 2010 Posts: 730 Location: Pembroke Pines, FL Expertise: I love coffee
Grinder: Preciso / LIDOs Drip: Trifecta MB / Eva Solo...
Posted Wed Jan 9, 2013, 7:18pm Subject: Re: using an 8-cup french press to make only one cup
This should work, I would think, as long as your coffee-water ratio is good and the plunger is managing to separate/hold back the grounds. If temp. stability is a problem due to the low volume, maybe fine up the grind and reduce steep time accordingly?
Posted Wed Jan 9, 2013, 8:03pm Subject: Re: using an 8-cup french press to make only one cup
The french press is probably the most forgiving when it comes to not making a full pot. The only problem I can think of is that the plunger is designed not to go all the way down, so with less grounds you'll probably have some liquid space between the filter and the top of the grounds. You can reduce the heat loss as well by wrapping the press in a kitchen towel while it brews-- I find that gives a better cup, especially for my smaller press, so it should work for a larger one. Because there is more glass to water ratio, you might also want a few seconds of preheat with boiling water as well.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.