Posted Sat Jul 10, 2004, 2:36pm Subject: Re: Brewing with the Bialetti Brikka 4-Cup
Sorry for joining this thread so late.
I guess I may be considered a traitor to the Brikka, which has been pretty much shelved by me since i got my Gaggia.
Yes, I do feel a bit guilty about it and must admit that, for the time being, that I got more consistent results from the Brikka than the Gaggia. My better Gaggia shots are better, more body, crema is a different quality entirely. I only did a side by side taste test once and the differences were clear even for the coffee under the crema.
I doubt the Bialetti will make a Stainless Steel model. They are gung ho on aluminum for its conductive qualities.
Stash, it would be great if you could get a two cup model to compare the results. Attached find a picture of "crema" (quite bubbly and pate though) that lasted for a couple of minutes. [peterin out only after pver four minute. This looks like it is about 1/2" and I don't think I manged getting even 1/4" with the four cup (as you did). Maybe I will study your post and try duplicating your method.
From what I understand the relationship of air/water in the boiler is unique in the Brikka series. That is why they use a three cup body for a two cup model and a six cup body for the four. However, i was told by their R&D man that a better four cup Brikka would actually require a different sized body.
I wanted to write an article about the Brikka and have been waiting to get some feedback from Bialetti. Can't say that i see any replies from them on the horizon.
Yes... it is the 6 cup. I am surprised that there are negative comments other than that it does take a little time to clean up. But I quickly became very efficient at cleaning it and it generally does not take more than a couple of minutes to thoroughly wash and dry all parts. I have been using it for more than a year with but one problem. Within the first month, the seal above the electric hot plate developed a leak. It was replaced quickly by Bodum and since then has worked flawlessly. It definitely gets the coffee hot enough. I have to be very careful to sip the coffee for the first minute or so to avoid burning my mouth.
Thanks for joining in !!! Funny... I went from a Gaggia to the Brikka. I am still thinking of buying another inexpensive pump machine... perhaps the Innova Arc that was just reviewed. After a year with the Gaggia, I felt like its performance was diminishing. If I had to guess, I suspect the aluminum boiler was the culprit along with overly softened water.
It does look like the 2-cup Brikka does a better job with the crema. If I do buy the 2-cup and/or a pump machine, I will run some comparisons and post the results. For now I am pretty happy with the little Brikka... but variety is the spice of life !!!
Le_Pamplemousse Senior Member Joined: 18 Aug 2004 Posts: 81 Location: Rural KY., USA Expertise: Just starting
Posted Wed Aug 18, 2004, 10:04pm Subject: Re: Brewing with the Bialetti Brikka 4-Cup
I'm just getting into coffee. Buying my first pot was a choice between a French Press and a Bialetti. I went with the French Press....but this thread makes me want to try the little stove-top Bialetti too. I guess that'll be my second pot! (after I get my Zassenhaus grinder though!)
Posted Mon Sep 20, 2004, 7:51pm Subject: Re: Brewing with the Bialetti Brikka 4-Cup
Bob - I have the Bialetti Brikka 4-cup, and it's my understanding that it only works correctly if you make the full 4-cups. Not sure if that's true of the 6-cup. By the way, I just measured it and my 4-cup uses about 5 oz of water. Apparently a moka pot cup is 1.25 oz.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.