somcrprt697 Senior Member Joined: 23 Mar 2014 Posts: 1 Location: marina Expertise: I love coffee
Posted Sun Mar 23, 2014, 6:45am Subject: Capresso Infinity Conical Burr Grinder
I stupidly completely disassembled my Infinity Conical Burr Grinder, and cannot figure out how to put it back together! I wanted to clean the grinder really well, so i unscrewed the grinding blade. There are three little springs and three little balls inside the machine where half of the grinding blade gets screwed back into place. Does anyone know where the balls and the springs go!?
After making sure it was out of warranty and unplugged, I went to work. Remove the center screw with a t20 torque bit. Be careful removing and re-installing because it feels like the the screw is threaded into plastic. Remove the plastic worm on top of the burr, burr, plastic disk, 3 ball bearings and 3 springs. Be careful with the plastic disc because it has 3 brass inserts that can fall out. Brush off (no water!) everything.
To re-assemble, put the brass inserts in the disc and install. The insert is keyed, so it will only fit one way. Next put the springs in, then the ball-bearings. Put the burr on, making sure the ball bearings are in the indents on the bottom of the burr. Install the worm then the screw. Carefully tighten the screw. You shouldn't have to force any of the parts and everything should be tight and level.
"But it is not a perfect world and none of us are god-shots. As for me, I am a little over extracted and therefore slightly bitter and my crema is thin..." -Buckley
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.