Posted Fri Nov 1, 2013, 4:16am Subject: French press problems
So, I've had some great brews out of my French press lately; it's normally my favorite brewing method because of the enhanced body. I'm willing to deal with some sediment in the coffee. But in the last few days I've had no success at all pressing my coffee. I haven't changed anything about my technique that I can think of, but the coffee is just tasting underextracted every time. I lengthened the steeping time from 4 minutes to 5 or 5 and a half, and still there's just no life to the brew. It's not undrinkable or bitter or unpleasant, just boring. Any ideas?
My method: - ~16 g coffee to ~240 ml water - Press preheated by a flush with boiling water - Water poured just off a boil - Bloom for ~20-30 sec; I just play this by ear depending on how fresh the coffee is. - Vigorous stir to be sure no grounds are suspended in the bloom - Start timer for 5 min - Slow plunge and pour into prewarmed mug
MWJB Senior Member Joined: 1 Jun 2013 Posts: 291 Location: UK Expertise: I like coffee
Grinder: Rocky, Lido, Porlex, Hario... Drip: Not enough room to list...
Posted Fri Nov 1, 2013, 11:49am Subject: Re: French press problems
Small pots are harder to get a high level of extraction with, the more water you use the better the thermal inertia, though having said that, you seem to be saying brews with the same pot aren't meeting expectation.
My personal preference is for a smaller dose (14g/250g) and longer steeps times.
I don't bother with blooming, I add the water first, grinds in on top, fold in, then a quick stir & steep. Avoid vigorous stirring...whatever method you use, just get everything wet & use the plunger to submerge grinds.
I don't plunge (picked up this tip from James Hoffmann's blog), when you think the brew is ready, sink any grounds still floating, scoop off any foam, pour out a little coffee into a cold cup to taste - taste it tepid, not hot, as hot you get a false impression of sweetness & it gets more sour as it cools. The first couple of table spoons out of the pot may just be oil, I discard this.
When you are happy with the taste (not before, go by taste rather than time) put the lid & plunger back on, holding the plunger above the surface of the brew (but below the spout obviously) & pour through it. Don't stir/plunge deep into the brew after steep starts.
Lastly, make sure your kettle doesn't taint the the water...some do, some don't, it doesn't seem to follow any particular material, more the precise model.
Posted Wed Nov 6, 2013, 11:17am Subject: Re: French press problems
If playing with the grind doesn't do anything I'd look into the beans. Can you tell us more about the roasts and green beans? One thing I noticed when using jars was sunlight. Direct sunlight can have an effect on the beans.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.