crlssctt Senior Member Joined: 6 Nov 2012 Posts: 27 Location: Clarkston
Posted Fri Feb 1, 2013, 12:33am Subject: Powered Hario skerton
Wondering if anyone else try this before?
I've been hesitant to buy an electric grinder as I don't make espresso and the skerton works great but sometimes I'm in a rush and refuse to settle for a cup that's not quite what I like, so I took the handle off the grinder and used an electric drill, I just have to make sure it goes on straight and I get to "wobble", just wondering if anyone else has done this, or is it sacrilegious?
Dear Carlos, A while back I created a fitting for the shaft of my Hario mini to mate the five-sided shaft with my standard hex bit quick connect power screwdriver (B&D). I am sorry to say that the screwdriver was under-torqued by far to grind a pourover grind directly driving the grinder shaft. It seems the lever handle makes all the difference in mechanical advantage. I did not try it with an espresso setting, where the burrs would be experiencing less 'bite' into the bean and therefore may require less force, but I am not optimistic. A power drill would definitely work, but does not fit my requirement of a small, convenient set-up for me to pack in my luggage. If trying this at home, I would be careful to use a variable speed drill. A cheap one-speed drill may be more likely to damage the grinder. Buckley
It does work fine with my Porlex Tall mill, for both CCD/drip and espresso level grinds. But you need to be very careful tightening the chuck onto the 5 sided handle fitting (anyone know why all the Japanese grinders seem to use 5 sided shafts?) or the chuck will slip and wear the shaft's corner smooth. A specific fitting is better (and I believe they can be found on the internet) for the grinder.
Both the 9V and 18V cordless drills I have access to work fine for this, and are nicely controllable at slow speeds.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.