heightsmike Senior Member Joined: 9 Feb 2013 Posts: 3 Location: HOUSTON Expertise: I live coffee
Posted Sat Feb 9, 2013, 7:18pm Subject: Roasting Profile Help - 2lb Little Tyke Roaster (CRC)
Hey all, I picked up one of Len's CRC all stainless 2lb. perforated stainless steel coffee roaster last weekend from a guy on Ebay. What nice piece of work! I did my inaugural roast tonight to break it in. Wasn't too concerned with the results, but the sequence of events surprised me. I had previously been roasting with a homemade contraption involving a cordless drill, a zip tie, a metal dowel, and an unused quart paint can that i fabbed out with internal fins and drilled about a hundred holes in it. You can youtube it if you just search for "houheightskid". Got great results from that little guy, but could only roast 10 oz at a time. So I upped my game!
Here's how tonights roast went. I use a Weber Genesis Silver grill and use the stock thermometer (for now).
1# Guatemala beans Took the temp up to 500-525 (with all three burners on...took a while to juice up to +500 for some reason. Must be the additional absorbtion of the roaster?) First crack came at about 8 minutes. Very surprised Second crack came at about 12+ minutes.
My previous contraption took about 14 min for first and then 17 min + for second.
My thoughts on this:
This roasting drum has much more airflow, reducing the roasting time
Middle burner on the entire time, more direct heat under the beans
Anyone out there have some roasting profiles for this type of roaster, 2lb capacity?
I would be interested in 1# and 2# roasting profiles....your method of what works.
I will continue to play around, but very much loving this already!
Posted Sat Feb 9, 2013, 8:38pm Subject: Re: Roasting Profile Help - 2lb Little Tyke Roaster (CRC)
Hey Mike glad to hear you are enjoying the roaster!
Your times are comparable to my hottop times maybe just a bit faster. I shoot for 9 minute first crack and pull my roast around 12 minutes adjusting the heat to achieve my desired roast level. I personally think 14 minutes to first crack is too long and you were probably losing some of the beans potential roasting that slow. I think you will be pleasantly surprised in a couple of days when you try these beans.
RichardCoffee Senior Member Joined: 2 Dec 2010 Posts: 108 Location: Long Beach Expertise: I live coffee
Espresso: gaggia baby twin, mini... Grinder: fiorenzato pietro 63mm,... Roaster: weber grill with rk drum
Posted Sat Feb 9, 2013, 8:54pm Subject: Re: Roasting Profile Help - 2lb Little Tyke Roaster (CRC)
For 1 pound in my RK drum, I don't get over 475 on a Weber 3 burner grill - 36000 btu. I get to 475 and then load the drum in the grill. Then to control temp, i usually have to turn the middle burner to low after about 5 minutes and then even have to turn the front to medium low. At first crack, I definitely turn the front to low and sometimes even have to lower the rear burner some to stretch the roast out. With this profile, I can hold off first crack to about 9 to 10 minutes and get 3 minutes after 1st without going into 2nd. For espresso, I like to get 4 minutes post 1st crack. Sometimes I win sometimes I lose. This time of year, my temperatures are a little off due to the cold weather.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.