Posted Mon Nov 5, 2012, 1:46pm Subject: Re: Quest M3 Roaster - New Asymmetric Heating?
If the heater power is regulated by a triac circuit (using phase angle control), then your Kill-A-Watt may not be able to measure either the watts or the power factor correctly. The chopped sine wave may be fooling it?
Not sure if it's a triac or thyristor (or whatever). In any case, I'm relieved to see now my Quest is getting less than the 1000W at the heaters when pulling 10A (and not 1200W or rather VA, as I originally thought).
So am I right to assume because the controller limits the real power by 20%, the roaster can safely use a 100V x 600W heater operating 20% beyond the voltage spec? If that's the case, I'll likely keep the hotter left 100V heater, since I prefer to have the extra heat for larger batches.
Endo Senior Member Joined: 26 Jun 2008 Posts: 804 Location: , location, location. Expertise: I love coffee
Espresso: machine is < important than... Grinder: !
Posted Tue Nov 13, 2012, 8:22pm Subject: Re: Quest M3 Roaster - New Asymmetric Heating?
This graph from my kill-a-watt might give people a better idea of how the power control works on my Quest.
I typically run between 9A and 10A (with 120V) for a 150g to 200g roast, but I can go all the way to 10.5A safely without exceeding the max power rating of 1050W (because of the phase fired controller).
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.