hoangelos Senior Member Joined: 27 Dec 2010 Posts: 15 Location: Corning, NY Expertise: I love coffee
Posted Tue Sep 18, 2012, 5:36am Subject: Turbo Crazy arm and airflow
So, I have a couple problems with the Turbo Crazy setup I have so far. First, is the arm. During the roast usually every few minutes or so I have the arm being pushed away from the motor. I'm sure it's because it's so light and the bean mass movement is doing that.
Second, I don't like that there's really no airflow of any kind in my unit. But I'm assuming that could be changed by adding an opening in the spring form pan I have.
Lastly, the beans don't rotate enough around. So, I"m wondering if this is starting to be time for me to look into getting another machine.
Posted Sat Sep 22, 2012, 3:51pm Subject: Re: Turbo Crazy arm and airflow
For the arm: use some pipe thread tape on the drive shaft fitting. That should keep it in place. Also, are you using the copper cap thing? It adds a bit of weight, helps keep the arm in place.
Airflow: As in air flowing out of the device? If your Turbo Oven is in proper working order, there should be plenty of air movement within the chamber, but if you'd like it to flow out, you can try the Woz chaff ejector mod.
Bean movement: As long as they're getting turned over, I wouldn't worry about them completing full revolutions around the pan. If they're not getting enough agitation, attach some barrier strips, hunks of metal, whatever looks like it will work, to the arms.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.