Posted Mon Feb 13, 2012, 10:26am Subject: Re: Hottop-B-2 End of roast question
KN-8828B-2K owners manual update.
An Interim Update to the owners manual for the KN-8828B-2k has just been added to the Hottop USA website. It can be downloaded from this page. The direct link for the addendum PDF is HERE. This is not a complete manual. It only includes the KN-8828B-2K section (for the most part). All other models should continue to refer to the appropriate manual, and all other important information regarding the KN-8828B-2K is in the current printed manual, a PDF version of which can be downloaded HERE.
s0ckeyeus Senior Member Joined: 18 Jan 2010 Posts: 309 Location: KY Expertise: I love coffee
Posted Tue Feb 28, 2012, 6:24pm Subject: Re: Hottop-B-2 End of roast question
I lower the heat during the drying phase around 250f on the HT display and keep it there until around 290f. I found that the HT temp probe is accurate for a brief time period around 250f. Prior to that the HT temp is higher than the actual BT and after 250f the actual BT is higher than the HT temp. After my warranty expires I plan on installing a BT and ET probe for data logging.
You can get a BT into the roaster without any real mods. I took a wire thermocouple and passed it through one of the seams in the plastic casing, then routed the thermocouple through a few existing holes in the roaster. I was able to position the thermocouple at the front of the roaster and angle the tip down so it gets solid contact with the bean mass, but doesn't hit the fins of the roaster. It might not be perfect, but it has given me consistent results for months. I can post pics sometime if anyone is interested.
"I have measured out my life with coffee spoons" - T.S. Eliot
Posted Mon Sep 3, 2012, 6:23am Subject: Re: Hottop-B-2 End of roast question
Thanks for the links- I ended up going with two wire probes- ET just above and BT just below the built in sensor. Been happily roasting away with Artisan and more accurate data ever since-- all thanks to the folks like you that paved the way.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No SEO style postings will be tolerated. SEO related posts will result in immediate ban from CoffeeGeek. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.