tcharp Senior Member Joined: 6 Dec 2002 Posts: 33 Location: Lubbock, TX Expertise: I live coffee
Espresso: Alex Duetto II Grinder: Compak K10
Posted Tue Nov 14, 2006, 7:28pm Subject: Re: How to Clean a Rancilio Rocky
Ok - I have a semi related question and a very related question.
I read people have to tug like heck to get the lower vane off. Any tools recommended? Any sugguestions?
Second - My doser is screwed up. The vanes move, but then do not catch and move back. I am guessing I have a screwed up gear, or spring, or something inside, but no clue how to get to it or what I need. I sent a request to WLL who will happily sell the part and give me instructions - but a second opinion is always helpfull.
I have the exact same problem. I have noted that 1st Line offers a kit. I'm wondering if I can replace the entire doser. I think its very likely that the little bendy metal clip has finished on my Rocky as it has worked flawlessly for nearly 5 years now.
Is anyone still paying attention to this thread? I sure hope so.
geertdevries Senior Member Joined: 6 Mar 2007 Posts: 27 Location: Netherlands Expertise: I love coffee
Posted Tue Mar 6, 2007, 6:44am Subject: Re: How to Clean a Rancilio Rocky
Good article! Seems a lot of work. So I use a grinder cleaner, which work more easy. They look like beans (same shape), you put it in the grinder, turn it on and it cleans the inside of your grinder. So you don't have to go all the way inside your grinder...
Noonievut Senior Member Joined: 9 Sep 2006 Posts: 472 Location: Toronto. Canada Expertise: I love coffee
Grinder: Rocky DL Vac Pot: Other - Aeropress, Clever,...
Posted Tue May 15, 2007, 1:25pm Subject: Re: How to Clean a Rancilio Rocky
(long...sorry) I've owned my Rocky DL for a few months and I clean every 2 weeks following the instructions here, however, I don't remove the top burr (clean takes 3-5 minutes in total). My question is do I need to remove the top burr (on this frequency, or at all)?
The first thing I do is use Grindz as per the instructions.
Then I remove the hopper (remembering which # it was set too when removed), remove the rubber and plastic part of the chute. These all get cleaned in soapy water. I brush any part of the burrs I can get at, then vacuum.
So far my coffee/espresso tastes as good as it did when I first bought it.
So, should I still remove the top burr and do some extra cleaning, or should this be sufficient?
I'm a little reluctant to remove the top burr. I don't care about my true 0 point, I just know what settings I use for espresso/FP/Aeropress (and variations for bean types).
Last bit (sorry again for the long e-mail, hope you're still reading), if the consensus is that Grindz and my cleaning are not enough and the top burr should come off for more cleaning, than this is what I would do (does this make sense):
- note my current setting (let's assume it's 10 and one of the screw holes are lined up with the front arrow)...I'll put a small piece of tape at that screw hole - turn the burr until removed, counting the number of revolutions - I guess I'll be lifting up as I turn the burr, otherwise I'm thinking I'll be turning the burr a couple of extra revolutions, then when I count when I put it back the count will be different (yes I'm anal)
denpet Senior Member Joined: 14 Sep 2011 Posts: 1 Location: Philippines Expertise: I like coffee
Posted Wed Sep 14, 2011, 8:34pm Subject: Re: How to Clean a Rancilio Rocky
Nice guide. However, I wouldn't be too afraid of removing the bottom burr as well. It gets really dirty underneath and it isn't that difficult to remove. The only thing you need is a socket wrench and something soft to hold the burr in place, e.g. a wooden butter knife. Just stick the butter knife in the hole from the front, to hold the burr in place while you gently unscrew the center screw from the grinder. Once done, you just lift the burr straight up. Now, give it a nice scrub to get all those old residuals off. The "gently" part in the unscrew sentence is important. If the screw is really stuck I don't recommend this method, as too much force might bend the axle.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.