Posted Sat Apr 19, 2003, 1:13pm Subject: Oily beans get stuck
I've owned this grinder for several years. Perhaps they've improved the design, but on my version, oily beans get stuck in the feed mechanism. I have to keep a thin rubber spatula nearby to push the beans into the grinder. This is really unacceptable for an expensive machine.
abecurb Senior Member Joined: 24 Jun 2003 Posts: 1 Location: Cape May, NJ Expertise: Intermediate
Posted Tue Jun 24, 2003, 1:27pm Subject: Downscale from Rocky
I thought I'd found a grinder with a doser at Amazon recently, but when I back for a second look it was gone. While I don't believe that the Capressa's (or whatever it was) of this world belong on the same page with Rancilio Rocky, do you know of another doser grinder at the low end?
I need help. I have a Rocky that needs a new bottom base as the front portion of it was broken off in transit. Does anyone out there know of a dealer that sells such a part? I would appreciate the info very much.
Got my new Rocky (doserless) yesterday. I also found the zero point without removing the screw, it was located at +1. turned the dial back 7 clicks and tried my first shot. It totally choked my Francis X3. Bought new beans today (Molinari) and succesfully found a position(14-16 on the dial) where I can pull a perfect double in 25 sec with a lot of nice rich dark crema. If I set it to 11-12 it will result in a 1oz ristretto.
This is a huge step forward in my coffee addiction. I used a Braun low-en burr grinder until now and could not get a good shot with that one (fast running with very blond crema).
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.