Posted Tue Sep 3, 2002, 10:39am Subject: Other important features
Great article, Alan. I do think, though, that two other features are important in espresso grinders. In the case of rotary pump machines, at least the Techno, no stepped grinder will be adjustable in fine enough increments. A second, related point, is that at that level it becomes important that there be some mechanism, like the springs in the Mazzer grinders, that takes the play out of the burr carrier threads. Otherwise the grind isn't repeatable enough for such a machine, and is too hard to adjust.
JDenver Senior Member Joined: 19 Dec 2001 Posts: 17 Location: Philadelphia, PA Expertise: Aficionado
Posted Wed Sep 4, 2002, 2:43pm Subject: Mazzer not the only grinder
David seems to imply that only a Mazzer will do as that is the only brand than meets his filter. I disagree. My Rossi RR45, for example, has 80 "clicks" per revolution, so each click represents about 4 degrees of rotation. more than fine enough for even the most finicky machine. And the threads are so fine that there is very little if any "lash". The Mazzer approach is very good, but there is more than 1 way to skin the cat.
I wonder if Alan has any thoughts on whether larger burrs (as in commercial grinders) produce a better grind (all else being equal) or only a faster one?
alanfrew Senior Member Joined: 19 Dec 2001 Posts: 596 Location: Melbourne Expertise: Professional
Posted Thu Sep 5, 2002, 4:15am Subject: Burr sizes etc.
Stepping (IMO) is unimportant, as are springs etc. All that stuff is "ergonomics" rather than grind quality. Rock hard precision gap adjustment and incredibly sharp burrs are the main factors, burr size over a certain level is more a productivity thing than a grind quality factor.
I can get an EXACT espresso grind for a particular machine (given a certain blend) 1st time and every time, regardless of humidity/temperature factors, using a commercial Ditting. It's just so BIG and so stable that "small grinder" problems are invisible. AFAIK, Swifts don't need tweaking every time the wind changes, either. In both examples I suspect that sheer precision is at work, along with the stability engendered by high mass and SHARP edges.
Outside of Swifts, Dittings & Mahlkoenigs I've yet to see an espresso grinder (commercial or domestic) where the same quality of engineering is evident. Certainly I've never seen one that is "head & shoulders" above a Rocky in pure grind quality terms.
I didn't mean to imply that only Mazzer grinders were suitable at a high level; sorry for my lack of clarity. Are you saying, Alan, that what changes with humidity, etc. is the grind size itself, rather than the required size? Very interesting if so.
By the way, it's my understanding that the developers of the Swift took advantage of ceramic burr technology that was driven by Ditting.
Symbols: = New Posts since your last visit = No New Posts since last visit = Newest post
Forum Rules: No profanity, illegal acts or personal attacks will be tolerated in these discussion boards. No commercial posting of any nature will be tolerated; only private sales by private individuals, in the "Buy and Sell" forum. No cross posting allowed - do not post your topic to more than one forum, nor repost a topic to the same forum. Who Can Read The Forum? Anyone can read posts in these discussion boards. Who Can Post New Topics? Any registered CoffeeGeek member can post new topics. Who Can Post Replies? Any registered CoffeeGeek member can post replies. Can Photos be posted? Anyone can post photos in their new topics or replies. Who can change or delete posts? Any CoffeeGeek member can edit their own posts. Only moderators can delete posts. Probationary Period: If you are a new signup for CoffeeGeek, you cannot promote, endorse, criticise or otherwise post an unsolicited endorsement for any company, product or service in your first five postings.